Message Boards
Today's Active Topics Browse Forum Categories My Recent Activity My Messages Private Groups My Marked Threads My Subscriptions
Today's Active Images Today's Active Polls Most Active Topics Global Townie Map Advanced Message Board Search Message Board Terms of Use

Morgan Electro Ceramics Powers the Ultreo Ultrasonic Toothbrush

Start Discussion
An Innovative idea
Posted: November 5, 2008
Ultreo Image1jpg (WinCE).jpg
Morgan Electro Ceramics Powers the Ultreo Ultrasonic Toothbrush
An Innovative idea

Innovative products, like the new Ultreo Ultrasound Toothbrush, start with a pioneering spirit and a creative new idea.  Dr. Pierre Mourad, a research associate professor in the University of Washington Department of Neurological Surgery, had been discouraged by the cleaning ability of his ordinary power toothbrush. He wondered if ultrasound, something he manipulates every day in his laboratory, could transform ordinary bubbles into pulsating bubbles that could help remove plaque bacteria and produce a deep, long-lasting feeling of clean.
To transform this revolutionary idea into a commercially-viable consumer product, Mourad joined forces in 2003 with Jack Gallagher, the former president of Optiva Corporation (developers of Sonicare®). As an entrepreneur in oral health, Gallagher immediately recognized an opportunity to re-energize the power toothbrush category with an entirely new technology.
Together, Mourad and Gallagher forged the way for Ultreo, a toothbrush that combines the innovative power of ultrasound – higher frequency sound waves that humans cannot hear – with established sonic technology to create the first major advance in toothbrush technology in 15 years.  The ultrasonic soundwaves are generated by a specially-designed piezoceramic transducer, designed in conjunction with and supplied by Morgan Electro Ceramics (MEC).
In September 2007, Ultreo received a U.S. patent for its ultrasound waveguide, which is specifically designed to efficiently channel ultrasound energy from the transducer in the brush head directly into the millions of air bubbles generated by sonic bristle action.  The precisely-tuned ultrasonic waves agitate the air bubbles, causing them to expand and contract.  The expansion and contraction of the bubbles dislodge and disrupt plaque bacteria. Clinical studies show that Ultreo can remove up to 95 percent of plaque in the first minute of brushing, as well as provide naturally whiter teeth in 14 days and improve gum health in 30 days.   The Engineering Challenge
The biggest challenge, according to Gallagher, now CEO of Ultreo, Inc., was the engineering.  “We could not simply buy a ready-made ultrasonic transducer.  We needed to design and construct a transducer specific to our particular application, a process that required two years of constant experimentation and refinement.  Moreover, a great deal of research went into the material composition and the shape of the ultrasound waveguide.”
To meet the engineering challenge, Ultreo teamed up with Morgan Electro Ceramics.  MEC was selected as the transducer supplier of choice at an early stage of involvement because of the depth and breadth of the company’s expertise with piezoelectric materials and applications. 
“We needed a materials and transducer vendor willing to partner with us to quickly work through multiple design iterations,” said Ultreo project manager, Doug Bradeen.  “We also chose MEC because of the wide range of piezoelectric materials they offer and their proven ability to manufacture high volumes of multilayered diced components.  We needed a transducer vendor who could support our rapid growth.”
A MEC high-drive, “hard” lead zirconate titanate (PZT) ceramic was selected for the application. It optimizes transducer efficiency, maximizes ultrasound output and keeps heat generation to an absolute minimum, a critical requirement in a fully-sealed, non-cooled device, to enhance in-service reliability.
The transducer comprises multiple layers of active PZT material plus an additional material that focuses the ultrasound.  MEC was able to develop processes to reliably bond these layers together while bringing all electrical connections to the top surface of the device.  This special configuration was needed to ease assembly requirements at the Ultreo production facility in Redmond, WA.  At the same time, these design changes had to be constrained by requirements for mass-manufacturing volumes and reducing cost. The transducer went through the Design For Manufacturing (DFM) validation process. High Volume Manufacturing
“The ultrasonic transducer is the heart of our product,” said Bradeen.  “We needed a high-performance technical solution that delivers the power of ultrasound to a consumer toothbrush.   But we also needed a manufacturing capability that could cost-effectively deliver the volume that we needed, when we needed it.
“Controlling the cost of the transducer is critical, because it is a major cost factor in the brush head, a replaceable part.  We need to offer brush head replacements to the consumer at an attractive price, while maintaining good profit margins.”
The partnership between researchers at University of Washington, the former executives of Optiva Corporation, and the piezoelectric ceramics experts at MEC has proven successful.  Ultreo began selling its toothbrushes to dental offices in March 2007 and has moved to high-end retail outlets such as Drugstore.com, Amazon.com, Sharper Image, Frontgate, Hammacher, Macys, Linens & Things, Bloomingdales and Bartell Drugs.  
About Morgan Electro Ceramics
Morgan Electro Ceramics (MEC) has a comprehensive range of Piezoelectric and Dielectric materials from which many products are manufactured, including Transducers, Sensors, Actuators and High Voltage & RF capacitors. MEC has established an enviable reputation for providing value-added solutions through world-class research and development, innovative design and, perhaps most important of all, application engineering.
Morgan Electro Ceramics, together with Morgan Advanced Ceramics forms Morgan Technical Ceramics, a Division of The Morgan Crucible Company plc.    From manufacturing locations in North America, Europe and Asia, Morgan Technical Ceramics supplies an extensive range of products, including ceramic components, braze alloys, ceramic/metal assemblies and engineered coatings.
For more information on Morgan Electro Ceramics visit http://www.morganelectroceramics.com or contact one of our sales offices below:
 
UK & Eire
Morgan Electro Ceramics Ltd, Vauxhall Industrial Estate, Ruabon, Wrexham, LL14 6HY
Tel: +44 (0) 1978 810456    Fax: +44 (0) 1978 824303
 
Morgan Electro Ceramics Ltd, Bursledon Road, Thornill, Southampton, SO19 7TG
Tel: +44 (0) 2380 444811    Fax: +44 (0) 2380 431768
 
Mainland Europe
Morgan Electro Ceramics BV, Zwaanstraat 2a, Bld RAH-1, 5651 CA Eindhoven, The Netherlands     
Tel: +31 4027 88864      Fax: +31 4027 84324                                   
 
 
North America
Morgan Electro Ceramics Inc, 232 Forbes Road, Bedford, Ohio 44146 5418, USA
Tel: +1 440 232 8600     Fax: +1 440 232 8731
 
Views: 19
Start Discussion
Sponsors
Site Menu
Message Boards Articles Continuing Education Podcasts Blogs Classifieds News Events Townie® Poll Ebooks Townie Choice Awards
Company Info
Contact Us Advertise With Us Howard Farran DDS, MBA Policies and Agreements
Site Help
Sally Gross, Member Services Specialist
Phone: +1-480-445-9710
Email: sally@farranmedia.com
©2025 Hygienetown, a division of Farran Media • All Rights Reserved
9633 S. 48th Street Suite 200 • Phoenix, AZ 85044 • Phone:+1-480-598-0001 • Fax:+1-480-598-3450